Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Español |Deutsch |Pусский |
| No.12965498
- Product Categories
- Friendly Links
- home > Supply > [Sunshine] POM rods, Tianjin POM rods, Tianjin POM rod manufacturers Jinlin Long Rubber
Information Name: | [Sunshine] POM rods, Tianjin POM rods, Tianjin POM rod manufacturers Jinlin Long Rubber |
Published: | 2014-04-29 |
Validity: | 0 |
Specifications: | Limitation |
Quantity: | |
Price Description: | |
Detailed Product Description: | [Tianjin Jinlin Long Rubber Products to recommend the star product-pom POM plastic sheet rod] before and after processing features: POM plastic, POM, POM rods is a smooth, shiny, hard and dense material, yellow or white , thin-walled portion translucent. Combustion characteristics is easy to burn, away from the fire continued to burn, flame yellow top, blue bottom, dripping melted, there is a strong pungent smell of formaldehyde, fish stench. 1, no need for drying before processing POM, preferably preheated (about 80 ℃) POM rod in the process, the stability of the product size is good. 2, POM processing temperature is very narrow (0 ~ 215 ℃), while slightly longer residence time in the barrel or the temperature exceeds 220 ℃ decomposition will produce strong irritant formaldehyde gas. 3, when Paul POM material injection pressure to be larger (and injection pressure similar) in order to reduce pressure drop. Screw speed is not too high, the residual amount is less. 4, POM POM product shrinkage larger bar price, easy to produce shrinkage or deformation. POM large specific heat, mold temperature high (80 ~ 100 ℃), very hot when the product release, the need to prevent burns fingers. 5, POM should be in the "medium voltage, medium-speed, low melt temperature, mold temperature higher" under the conditions of molding, mold temperature control when required precision molding products. 6, with a high mechanical strength and rigidity. 7, the highest fatigue strength. 8. Environmental resistance, excellent resistance to organic solvents. 9. Resistance to repeated impact resistance, good electrical properties, good recovery, with self-lubricating, wear good dimensional stability. [Tianjin Jinlin Long Rubber Products to recommend Star Products] Pom-pom plate rod plate Properties: POM is a side-chain, high-density, high-crystalline linear polymer with excellent performance. POM is a smooth, shiny, hard and dense material, yellow or white, long-term use in the -40-100 ° C temperature range. Its wear resistance and self-lubricating plastic is superior than most, and good oil, peroxide-resistant properties. Very acid POM stick wholesale, intolerance alkali resistant to sunlight and ultraviolet radiation. The tensile strength of POM 70MPa, water absorption, dimensional stability, glossy, these properties are better than nylon, POM is a highly crystalline resin Tianjin POM rods, thermoplastic resin is the toughest. With thermal strength, flexural strength, fatigue resistance are high strength, abrasion resistance and excellent electrical properties. [Sunshine] POM rods, Tianjin POM rods, Tianjin POM rod manufacturers Jinlin Long Rubber provided by 金林龙 rubber. Welcome to consult Jinlin Long Rubber Products Co., Ltd. Tianjin (www.tjjll.com), be sure to specify when contact is through the "Business Alliance Member" see, thank you! Contact: Fang Xiaolin |
Admin>>>
You are the 27574 visitor
Copyright © GuangDong ICP No. 10089450, Rubber and Plastic Products Co., Ltd. Tianjin Jin Linlong All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 27574 visitor
Copyright © GuangDong ICP No. 10089450, Rubber and Plastic Products Co., Ltd. Tianjin Jin Linlong All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility